How to Use VoipTufo with your SIP device

You can use VoipTufo with the following types of Sip devices:

SIP ATA (Analogue Telephone Adapter)
SIP Router
xDSL Modem

The most devices are equipped with a combination of the following ports.

Example 1

(this is merely an example layout, every type of device can be different)

Example 2

(this is merely an example layout, every type of device can be different)

(A)DSL: connect your line from your (A)DSL provider (not available on a ATA)
WAN: connect your line from your xDSL modem/router
LAN: port for your (home) network, you can connect e.g. your PC, lap-top, network-printer or wireless router
PHONE: here you can connect your analogue telephone
LINE: connect your analogue (PSTN) telephone line
USB: you can connect PC or lap-top with a free USB port

Some SIP devices have more than one LAN port and/or PHONE port available.

For the hardware connections from your SIP device look at the above information and your user manual.
After connecting hardware you have to make sure that your software is installed and configured the right way.

Software configuration


SIP port : 5060
Registrar : either or the IP:
Proxy server : either or the IP:
Outbound proxy server : leave empty
Account name : your VoipTufo username
Password : your VoipTufo password
Display name/number : your VoipTufo username or voipnumber
Stunserver (option) :

Below are some examples of the software configuration of various popular SIP devices. Please also consult the manual that came with your SIP device

 AVM Fritz!box FON 7050 (click here to expand)

 AVM Fritz!box FON ATA 1020 (click here to expand)

 LINKSYS WIP330 (click here to expand)

 LINKSYS SPA3102 (click here to expand)

 GRANDSTREAM HT286 (click here to expand)

 GRANDSTREAM HT386 (click here to expand)

 GRANDSTREAM HT486 (click here to expand)

 GRANDSTREAM HT496 (click here to expand)

 SIEMENS SX553 (click here to expand)

 SMC 7908 VoWBRA (click here to expand)

 X-lite v3.0 Software (click here to expand)


G.711 (64 kbps)
G.726 (32 kbps)
G.729 (8 kbps)
G.723 (5.3 & 6.3 kbps)
GSMFR (13.2 kbps)

If you have audio problems:
Use a STUN server (e.g. with port 3478 (if supported by your device)
Use the G.711 codec

Important notice:
Some Sip devices will not accept the symbol "@" in the username.
In that case you can use the symbol "*" instead.
For ex: customer1@reseller will become customer1*reseller

This will allow you to register on the sip device.

SIP settings:
Main sip server: on port 5060 (standard)
Alternative sip server #1: on port 6000
Alternative sip server #2: on port 6000
Stun server #1:
Stun server #2: